| Chassis [CSE-822T-550LPB] CHAS ATX 2U SATA DP XEON 6X HD 550W NO CD BLK | 
 |
| CSE-822T-550LPB |
- SuperChassis 822T-550LPB (Black)
|
| |
 |
 |
| 2U chassis support for max. motherboard size - 12" x 13" E-ATX |
 |
 |
 |
| Height |
 |
3.5" (89mm) |
 |
| Width |
 |
16.8" (426mm) |
 |
| Depth |
 |
25.6" (650mm) |
 |
| Gross Weight |
 |
49 lbs (22.3kg) |
 |
| Available Colors |
 |
Beige, Black |
 |
 |
 |
| 7x low-profile full-length expansion slots |
 |
 |
 |
| Hot-swap |
 |
6x 3.5" SAS / SATA Hot-swap drive bay |
 |
| Peripheral Bay(s) |
 |
1x 5.25" full-height peripheral bay |
 |
 |
 |
| 1x 2U SATA Backplane (without SAF-TE) |
 |
 |
 |
| Floppy |
 |
Panasonic 3.5" 1.44MB Floppy Drive (Beige) |
 |
| CD-ROM |
 |
TEAC Slim 24x CD-ROM drive (optional) |
 |
 |
 |
| Buttons |
 |
• Power On/Off button • System Reset button |
 |
| LEDs |
 |
• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED |
 |
| Ports |
 |
none |
 |
|
 |
 |
 |
| Fans |
 |
4x 80mm 3400 RPM fans |
 |
 |
 |
| Operating Temperature Range |
 |
10 - 35°C (50° to 95° F) |
 |
| Non-Operating Temperature Range |
 |
-40 - +70°C (-40° to 158° F) |
 |
| Humidity Range |
 |
8 - 90% non-condensing |
 |
| Non-Operating Humidity Range |
 |
5 - 95% non-condensing |
 |
 |
 |
550W AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] |
 |
| AC Voltage |
 |
• 100 - 240V, 47-63Hz, 9/4.5 Amp |
 |
| DC Output |
 |
• 12V + 5V + 3.3V ≤ 550W |
 |
| +5V |
 |
35.0 amp |
 |
| +5V standby |
 |
2.0 amp |
 |
| -5V |
 |
0.8 amp |
 |
| +12V |
 |
42.0amp |
 |
| -12V |
 |
1.0 amp |
 |
| +3.3V |
 |
30.0 amp |
 |
 |
 |
| Power Supply Safety / EMC |
 |
• USA - UL listed, FCC • Canada - CUL listed • Germany - TUV Certified • Europe/CE Mark • EN 60950/IEC 60950-Compliant |
 |
|
|
| Motherboard [H8DAE] EATX MBD H8DAE IDE GETHX2 VGA AMD | 
| Physical Stats |
 |
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
| Processor/Chipset |
 |
| CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipset |
- AMD 8131 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
| |
| System Memory |
 |
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory
- For Single CPU: Memory must be populated in CPU I DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| On-Board Devices |
 |
| IPMI |
- 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI)
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers |
- Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
|
| |
| Input / Output |
 |
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- FUCI
- Up to 5 USB Ports 1.1 Compliant
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
|
 |
| Expansion Slots |
 |
| PCI-X |
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 66MHz PCI-X (3.3V) slots
|
| PCI |
- 2 32-bit 33MHz PCI (5V) slots
|
| IPMI |
|
| |
| System BIOS |
 |
| | |
|
|