| Chassis [CSE-822T-R500RCB] CHAS EATX SC822TB 2U SATA REDUN 500W BLK 6 HD |  |  | |  |  | | 2U chassis support for max. motherboard size - 12" x 13" E-ATX |  |  |  | | Height |  | 3.5" (89mm) |  | | Width |  | 16.8" (426mm) |  | | Depth |  | 25.6" (650mm) |  | | Gross Weight |  | 53 lbs (24.0kg) |  | | Available Colors |  | Beige, Black |  |  |  | • Capacity for 3x full-height/length expansion slots • Default - 2x full-height/length 64-bit 5V PCI slots (with passive riser card) • Optional - 3x full-height/length 64-bit 3.3V PCI-X slots (with active riser card) |  |  |  | | Hot-swap |  | 6x 1" SAS / SATA Hot-swap drive bay |  | | Peripheral Bay(s) |  | 1x 5.25" full-height peripheral bay |  |  |  | | 1x 2U SATA backplane (without SAF-TE) |  |  |  | | Floppy |  | Panasonic 3.5" 1.44MB Floppy Drive (beige) |  | | CD-ROM |  | (see options above) |  |  |  | | Buttons |  | • Power On/Off button • System Reset button |  | | LEDs |  | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power fail LED |  | | Ports |  | none |  | |  |  |  | | Fans |  | 4x 80mm 3400 RPM fans |  |  |  | | Operating Temperature Range |  | 10 - 35°C (50° to 95° F) |  | | Non-Operating Temperature Range |  | -40 - +70°C (-40° to 158° F) |  | | Humidity Range |  | 8 - 90% non-condensing |  | | Non-Operating Humidity Range |  | 5 - 95% non-condensing |  |  |  | Redundant 2U 500W AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ] |  | | AC Voltage |  | • 100 - 240V, 50/60Hz, 8 Amp |  | | DC Output |  | • 5V + 3.3V ≤ 200W |  | | +5V |  | 30.0 amp |  | | +5V standby |  | 2.0 amp |  | | -5V |  | 1.0 amp |  | | +12V |  | 39.0amp |  | | -12V |  | 0.5 amp |  | | +3.3V |  | 21.0 amp |  |  |  | | Power Supply Safety / EMC |  | • USA - UL listed, FCC • Canada - CUL listed • Germany - TUV Certified • Europe/CE Mark • EN 60950/IEC 60950-Compliant |  | | | |
| Motherboard [H8DAE] EATX MBD H8DAE IDE GETHX2 VGA AMD | 
| Physical Stats |
 |
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
| Processor/Chipset |
 |
| CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipset |
- AMD 8131 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
| |
| System Memory |
 |
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory
- For Single CPU: Memory must be populated in CPU I DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| On-Board Devices |
 |
| IPMI |
- 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI)
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers |
- Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
|
| |
| Input / Output |
 |
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- FUCI
- Up to 5 USB Ports 1.1 Compliant
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
|
 |
| |
|
|