| Chassis [CSE-825S2-R700LPB] CHAS EATX SC825S2R700LPB 2U 8XU320 7XLP R700W BLK | 
 | | 2U chassis support for max. motherboard size - 13" x 13.68" E-ATX | | |  | | Dual Xeon® 1066MHz FSB Processors | | |  | | Height | 3.5" (89mm) | | Width | 17.2" (437mm) | | Depth | 25.5" (648mm) | | Gross Weight | 50 lbs (22.7kg) | | Available Colors | Silver, Black | | |  | | • 7x low-profile full-length expansion slots | | |  | | Hot-swap | 8x 3.5" U320 SCSI Hot-swap drive trays | | |  | | 1x 2U Dual-Channel U320 SCSI backplane | | |  | | DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive | | Floppy | Slim 1.44MB Floppy Drive (Optional) | | |  | | Buttons | • Power On/Off button • System Reset button | | LEDs | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power fail LED | | Ports | 2x USB Ports + DB9 COM Port (optional) | |  |  |  | | Fans | 3x 80mm 6300 RPM fans | | |  | | Chassis intrusion switch | | |  | | Operating Temperature Range | | | Non-Operating Temperature Range | - -40 - 70°C (-40° - 158°F)
| | Humidity Range | | | Non-Operating Humidity Range | | | |  | | (1 + 1) Redundant 700W AC-DC power supply w/ PFC | | AC Voltage | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| | +5V standby | | | +12V | | | |  | | Power Supply Safety / EMC | - USA - UL listed
- Canada - CUL listed
- Germany - TUV Certified
- EN 60950/IEC 60950-Compliant
- CB Report
- CCC Certification
| | |
| Motherboard [MBD-H8DME-2-O] EATX DP AMD 2000 SOCK F 6X SATA2 64GB DDR2 GB VGA | 
 | | MBD-H8DME-2-O | - H8DME-2 (Standard Retail Pack)
| | MBD-H8DME-2-B | | | |  | | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | |  | | CPU | - Dual 1207-pin Socket F
- Supports up to two Quad-Core / Dual-Core AMD Opteron™ 2000 Series (Socket F) processor(s)
| | System Bus | | | Chipset | - nVidia MCP55 Pro
- NEC uPD720400
| | |  | | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 64 GB DDR2 667 MHz memory *
- Supports up to 32 GB DDR2 533 MHz memory
- Supports up to 64 GB DDR2 400 MHz memory
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
| | Memory Type | - DDR2 667/533/400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB **
| | Memory Voltage | | | |  | | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
-
-
- RMM (Remote Management Module)
- (Card not included)
| | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI ES1000 Graphics Controller
| | Super I/O | | | |  | | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | - 1 Floppy port; 1.44 MB support
| | LAN | | | USB | - FUCI
- Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 4 Internal Headers
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 serial port header
| |  |  |  | | Important Chassis Notes | - To ensure system stability, a 550W (minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 24-pin are required] | | |  | | PCI-Express | - 2 x8 PCI-e slots
- 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
| | PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 100MHz PCI-X (3.3V) slot
| | IPMI | | | |  | | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
| | |  | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
Doctor III - Watch Dog
| | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | |  | | CPU | - Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
- CPU switching voltage regulator
| | FAN | - Total up to 8-fan status tachometer monitoring
- Up to six 3-pin and two 4-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | |
| | Shopping Cart | | Your Shopping Cart is Empty |
| Product Image |  |
|