| Chassis [CSE-822T-R500RCB] CHAS EATX SC822TB 2U SATA REDUN 500W BLK 6 HD |  |  | |  |  | | 2U chassis support for max. motherboard size - 12" x 13" E-ATX |  |  |  | | Height |  | 3.5" (89mm) |  | | Width |  | 16.8" (426mm) |  | | Depth |  | 25.6" (650mm) |  | | Gross Weight |  | 53 lbs (24.0kg) |  | | Available Colors |  | Beige, Black |  |  |  | • Capacity for 3x full-height/length expansion slots • Default - 2x full-height/length 64-bit 5V PCI slots (with passive riser card) • Optional - 3x full-height/length 64-bit 3.3V PCI-X slots (with active riser card) |  |  |  | | Hot-swap |  | 6x 1" SAS / SATA Hot-swap drive bay |  | | Peripheral Bay(s) |  | 1x 5.25" full-height peripheral bay |  |  |  | | 1x 2U SATA backplane (without SAF-TE) |  |  |  | | Floppy |  | Panasonic 3.5" 1.44MB Floppy Drive (beige) |  | | CD-ROM |  | (see options above) |  |  |  | | Buttons |  | • Power On/Off button • System Reset button |  | | LEDs |  | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power fail LED |  | | Ports |  | none |  | |  |  |  | | Fans |  | 4x 80mm 3400 RPM fans |  |  |  | | Operating Temperature Range |  | 10 - 35°C (50° to 95° F) |  | | Non-Operating Temperature Range |  | -40 - +70°C (-40° to 158° F) |  | | Humidity Range |  | 8 - 90% non-condensing |  | | Non-Operating Humidity Range |  | 5 - 95% non-condensing |  |  |  | Redundant 2U 500W AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ] |  | | AC Voltage |  | • 100 - 240V, 50/60Hz, 8 Amp |  | | DC Output |  | • 5V + 3.3V ≤ 200W |  | | +5V |  | 30.0 amp |  | | +5V standby |  | 2.0 amp |  | | -5V |  | 1.0 amp |  | | +12V |  | 39.0amp |  | | -12V |  | 0.5 amp |  | | +3.3V |  | 21.0 amp |  |  |  | | Power Supply Safety / EMC |  | • USA - UL listed, FCC • Canada - CUL listed • Germany - TUV Certified • Europe/CE Mark • EN 60950/IEC 60950-Compliant |  | | | |
| Motherboard [GA-MA78GM-S2H] SOCKET AM2+/AM2,AMD 780G,4DDR2UATX | Specifications
| CPU | - Support for Socket AM2+/ AM2 processors: AMD Phenom™ FX processor/ AMD Phenom™ X4 processor/ AMD Phenom™ X3 processor/ AMD Athlon™ X2 processor/ AMD Athlon™ processor/ AMD Sempron™ processor
| | Hyper Transport Bus | - 5200/2000 MT/s
| | Chipset | - North Bridge: AMD 780G
- South Bridge: AMD SB700
| | Memory | - 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR2 1066 (Note 2)/800/667 MHz memory modules
| | Audio | - Realtek ALC889A codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for DTS (dts NEO:PC)
- Support for S/PDIF In/Out
- Support for CD In
| | LAN | - Realtek 8111C chip (10/100/1000 Mbit)
| | Expansion Slots | - 1 x PCI Express x16 slot (The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
- 1 x PCI Express x1 slot
- 2 x PCI slots
- (In a 1u server form factor only the x16 pci express slot is available)
| | Storage Interface | South Bridge: - 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 5 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4) supporting up to 5 SATA 3Gb/s devices
- 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s device
- Support for SATA RAID 0, RAID 1, RAID 10 and JBOD
iTE IT8718 chip: - 1 x floppy disk drive connector supporting up to 1 floppy disk drive
| | IEEE 1394 | T.I. TSB43AB23 chip - Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
| | USB | Integrated in the South Bridge - Up to 12 USB 2.0/1.1 ports (4 on the back panel, 8 via the USB brackets connected to the internal USB headers)
| | Internal I/O Connectors | - 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 5 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 1 x system fan header
- 1 x front panel header
- 1 x North Bridge fan header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In/Out header
- 1 x IEEE 1394a header
- 4 x USB 2.0/1.1 headers
- 1 x parallel port header
- 1 x serial port header
- 1 x chassis intrusion header
- 1 x power LED header
| | Back Panel Connectors | - 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x D-Sub port
- 1 x DVI-D port (Note 3)
- 1 x HDMI port
- 1 x optical S/PDIF Out connector
- 1 x eSATA 3Gb/s port
- 1 x IEEE 1394a port
- 4 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
| | I/O Controller | - ITE IT8718 chip
| | H/W Monitoring | System voltage detection - CPU/System temperature detection
- CPU/System fan speed detection
- CPU overheating warning
- CPU/System fan fail warning
- CPU/System fan speed control (Note 4)
| | BIOS | - 1 x 8 Mbit flash
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
| | Unique Features | - Support for @BIOS
- Support for Download Center
- Support for Q-Flash
- Support for EasyTune (Note 5)
- Support for Xpress Install
- Support for Xpress Recovery2
- Support for Virtual Dual BIOS
| | Form Factor | - Micro ATX Form Factor; 24.4cm x 24.4cm
| |
| | Shopping Cart | | Your Shopping Cart is Empty |
| Product Image |  |
|