| Chassis [CSE-113TQ-700CB] Supermicro 1U 8 bay 2.5 in SATA/SAS Hotswap 700 Watt High-Efficiency Power Supply | 
| Form Factor |  | | 23.5" Depth 1U Rackmount Chas=is - support for motherboard sizes of 13.68" x 13" & 12" x 13" | | | | Processor Support |  | | Support Dual Intel® Xeon®, Intel® Celeron® 400 series (Conroe-L), Intel® Pentium® D, Single / Dual AMD Opteron™ | | | | Dimensions |  | | Height | | | Width | | | Depth | | | Gros= Weight | | | Available Colors | | | | | Expansion Slots |  | | • 1x Full-height & Full-length PCI expansion slot | | | | Drive Bays |  | | Hot-swap | - 8x Hot-swap 2.5" SAS / SATA HDD tray
| | | | SAS / SATA Backplane |  | | 1x 1U SAS / SATA backplane | | | | Peripheral Drives |  | | DVD-ROM | | | | | Front Panel |  | | Buttons | - Power On/Off button
- System Reset button
- UID button
| | LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
| |  |  | | System Cooling |  | | Fans | - 4x 40x56mm counter-rotating fans
| | |  | | Operating Environment (System) |  | | Operating Temperature Range | | | Non-Operating Temperature Range | - -40 - 70°C (-40° - 158°F)
| | Humidity Range | | | Non-Operating Humidity Range | | | | | Power Supply |  | | 700W AC-DC power supply and power distributor w/ PFC | | AC Input | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| | +5V standby | | | +12V | | | +5V | | | +3.3V | | | -12V | | | | | Regulatory (Power Supply) |  | | Power Supply Safety / EMC | - USA - UL listed, FCC
- Canada - CUL listed
- CCC Certification
- EN 60950/IEC 60950-Compliant
- Europe/CE Mark
- Germany - TUV Certified
| | |
| Motherboard [MBD-C2SBA+II-O] CORE2 DUO/QUAD, LGA775, FSB 1333/1066/800, INTEL G33 + ICH9R CHIPSET, UP TO 8GB | 
 | | Form Factor | | | Dimensions | - 12.0" x 9.6 ", (30.5cm x 24.4cm)
| | |  | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Core™2 Quad Q9000/Q6000 series processor
- Supports an Intel® Core™2 Duo E8000/E6000 series processor
- Supports an Intel® Pentium® dual-core E2000 series processor
- Supports an Intel® Celeron® 400 series processor
| | System Bus | - 1333 / 1066 / 800 MHz system bus
| | |  | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
| | Memory Type | - DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2 GB
| | Memory Voltage | | | |  | | Chipset | | | Serial ATA | - Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | Network Controllers | - 1 x Intel® 82566 Gigabit Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
| | Audio | - High Definition 7.1 Channel Audio
| | Video | | | Super I/O | | | Clock Generator | | | |  | | Serial ATA | - Six Serial ATA ports (3Gbps)
- Six SATA hard drives supported
| | IDE | - Two EIDE channel supports up to four UDMA IDE devices
- ITE8212 chipset
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 12x USB 2.0 / 1.1 compatible
- 6 rear + 2 Type A connectors + 2 headers (4 ports)
| | Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | Parallel Port | - 1x ECP / EEP Parallel Port
| |  | | |  | | PCI-Express | - 1 (x16) PCI-e slot
- 1 (x4) PCI-e slot (using x8 slot)
- 1 (x1) PCI-e slot
| | PCI | - 3x 32-bit 33MHz PCI (5V) slots
| | |  | | BIOS Type | - 16Mb Flash EEPROM with SPI BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | |  | | Software | - Super
Doctor III - Watch Dog
- NMI
- Hardware monitor in W83627DHF (PECI support)
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
- Suspend to RAM (STR)
| | |  | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
| | FAN | - Total of five 4-pin fan headers
- 3 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- Standby power alert LED
| | Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
| | |
| | Shopping Cart | | Your Shopping Cart is Empty |
| Product Image |  |
|