| Chassis [CSE-822T-R500RCB] CHAS EATX SC822TB 2U SATA REDUN 500W BLK 6 HD | 
|  | |  |  | | 2U chassis support for max. motherboard size - 12" x 13" E-ATX |  |  |  | | Height |  | 3.5" (89mm) |  | | Width |  | 16.8" (426mm) |  | | Depth |  | 25.6" (650mm) |  | | Gross Weight |  | 53 lbs (24.0kg) |  | | Available Colors |  | Beige, Black |  |  |  | • Capacity for 3x full-height/length expansion slots • Default - 2x full-height/length 64-bit 5V PCI slots (with passive riser card) • Optional - 3x full-height/length 64-bit 3.3V PCI-X slots (with active riser card) |  |  |  | | Hot-swap |  | 6x 1" SAS / SATA Hot-swap drive bay |  | | Peripheral Bay(s) |  | 1x 5.25" full-height peripheral bay |  |  |  | | 1x 2U SATA backplane (without SAF-TE) |  |  |  | | Floppy |  | Panasonic 3.5" 1.44MB Floppy Drive (beige) |  | | CD-ROM |  | (see options above) |  |  |  | | Buttons |  | • Power On/Off button • System Reset button |  | | LEDs |  | • Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED • Power fail LED |  | | Ports |  | none |  | |  |  |  | | Fans |  | 4x 80mm 3400 RPM fans |  |  |  | | Operating Temperature Range |  | 10 - 35°C (50° to 95° F) |  | | Non-Operating Temperature Range |  | -40 - +70°C (-40° to 158° F) |  | | Humidity Range |  | 8 - 90% non-condensing |  | | Non-Operating Humidity Range |  | 5 - 95% non-condensing |  |  |  | Redundant 2U 500W AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ] |  | | AC Voltage |  | • 100 - 240V, 50/60Hz, 8 Amp |  | | DC Output |  | • 5V + 3.3V ≤ 200W |  | | +5V |  | 30.0 amp |  | | +5V standby |  | 2.0 amp |  | | -5V |  | 1.0 amp |  | | +12V |  | 39.0amp |  | | -12V |  | 0.5 amp |  | | +3.3V |  | 21.0 amp |  |  |  | | Power Supply Safety / EMC |  | • USA - UL listed, FCC • Canada - CUL listed • Germany - TUV Certified • Europe/CE Mark • EN 60950/IEC 60950-Compliant |  | | | |
| Motherboard [PDSMA+] ATX I3000 XEON 3000 PD P4 8GB DDR2 4X SATA VGA GET | 
 | | MBD-PDSMA+-O | - PDSMA+ (Standard Retail Pack)
| | MBD-PDSMA+-B | | | |  | | Form Factor | | | Dimensions | - 12.0" width x 9.6 " length , (30.5cm x 24.4cm), 6 layers
| | |  | | CPU | - Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 Series processor
- Supports a Dual-Core Intel® Xeon® 3000 Series processor
- Supports a Quad-Core Intel® Core™2 Extreme Series processor
- Supports an Intel® Core™2 Quad Series processor
- Supports an Intel® Core™2 Duo Series processor
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® D processor
| | System Bus | - 1066 / 800 / 533 MHz system bus
| | |  | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC/Non-ECC DDR2 667/533 MHz memory (Dual Channel)
| | Memory Type | - DDR2 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | | | |  | | Chipset | - Intel 3000 chipset
- ICH7R SB + PXH-V
| | Serial ATA | - Intel® ICH7R SB SATA controller built-in for 4 SATA (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - 1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IMPI20-E)
| | Network Controllers | - 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
| | VGA | - On-board XGI Z7 graphics, 16MB
| | Super I/O | | | Clock Generator | | | |  | | Serial ATA | - Four Serial ATA ports (3.0 Gbps performance)
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 6x USB 2.0 compliant / 1.1 compatible
- 2x internal USB headers for 4 ports
- 2x USB Rear Ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
| | Parallel Port | | |  |  |  | | 3U / Mid-Tower | - CSE-733T-450
- CSE-733T-645
- CSE-733i-450
- CSE-733i-645
| | 4U / Tower | | | |  | | PCI | - 5x 32-bit 33MHz PCI (5V) slots
| | PCI-X | - 1x 64-bit PCI-X 133MHz Slot
| | PCI-Express | | | |  | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 (limited)
- USB Keyboard support
- SMBIOS 2.3
- PECI
| | |  | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
Doctor III - Watch Dog
- W83793 Hardware Monitor
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | |  | | CPU | - Monitors for CPU Cores,Memory +1.8V, Chipset +1.5V, VIT FSB, +3.3V, +5V, ±12V, 3.3V Standby, +5V Standby, VBAT
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| | FAN | - Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor for on/off control
- Status monitor for speed control
- Low noise fan speed control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- Standby Voltage Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | RoHS
| - RoHS Compliant 6/6, Pb Free
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|  | | FCC | - Passed to meet FCC standard requirement
| |  |
| | Shopping Cart | | Your Shopping Cart is Empty |
| Product Image |  |
|