| Chassis [CSE-813TQ-520CB] SUPERMICRO CHASIS EATX 1U BLACK 1 PCI 520W 4X SATA BAYS |   | | | | | CSE-813TQ-520CB | - SuperChassis 813TQ-520C (Black)
| | |  |  | | 1U chassis support for max. motherboard size - 12" x 13" E-ATX | | |  | | Dual 64-bit Xeon® Processors (Dual-core included) | | |  | | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | |  | | • 1x full-height, full-length PCI expansion slot (Riser Card Required) | | |  | | Hot-swap | - 4x 3.5" SAS / SATA Hot-swap drive trays
| | |  | | 1x 1U SAS / SATA backplane | | |  | | Floppy | - TEAC 3.5" 1.44MB Slim Floppy Drive
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | |  | | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | Ports | - 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
| |  |  |  | | Fans | | | |  | | Operating Temperature Range | | | Non-Operating Temperature Range | - -40 - +70°C (-40° to 158° F)
| | Humidity Range | | | Non-Operating Humidity Range | | | |  | | 520W AC to DC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50 - 60Hz, 7 - 3Amp
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | |  | | Power Supply Safety / EMC | - USA - UL listed, FCC
- Canada - CUL listed
- China - CCC Mark
- EN 60950/IEC 60950-Compliant
- Germany - TUV Certified
| |  | |
| Motherboard [MBD-X7DVL-E-O] ATX MBD X7DVLE INTEL5000V 16GB DDR2 6 SATA 3.0 VGA |   |  |  |  |  | | MBD-X7DVL-E-O | - X7DVL-E (Standard Retail Pack)
| | MBD-X7DVL-E-B | | | |  | | Form Factor | | | Dimensions | - 12" x 10" (30.5cm x 25.4cm)
| | |  | | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 5100/5000 sequence (Woodcrest/Dempsey processor) with 2MB L2 Integrated Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz
| | System Bus | - 1333 / 1066 / 667 MHz system bus
| | |  | | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
| | Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | |  | | Chipset | - Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIM1U)
- (Optional: AOC-SIMLC, AOC-SIM1U)
| | Network Controllers | - Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 16 MB of video memory
| | Super I/O | | | |  | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | | | |
|
|