Combining the features of an IP router, QoS appliance, IPSec VPN
appliance, firewall, T1 DSU/CSU, and Ethernet switch, the Q2200
QoS Access Router saves you money right out of the box. Setup and
maintenance become far less time-consuming and expensive with
an integrated device. And the Q2200 router's intuitive graphical user
interface (GUI) helps remote offices get up and running quickly.
|
| Manufacturer |
Kentrox, LLC |
| Manufacturer Part Number |
2200 |
| Manufacturer Website Address |
www.kentrox.com |
| Brand Name |
Kentrox |
| Product Name |
Q-Series Q2200 Access Router |
| Product Type |
Access Router |
| Interfaces/Ports | Number of Ports | 5 |
| Fast Ethernet Port | Yes |
| T-Carrier Port | Yes |
| Interfaces/Ports | 1 x RJ-45 Management |
|
| Media & Performance | Connectivity Media | Category 5 UTP |
|
| Management & Protocols | Management |
GUI: Intuitive Web-style GUI (accessible from WAN or LAN)
Access Management: Three levels-admin, configure, view; up to 10 users with passwords
Logs: Alarm, System, Firewall, Traffic, VPN Syslog support
SNMP: Traps, MIB II, DS1, I/F MIBs, Frame Relay DTE MIB
Updates: Software updates via FTP or GUI
CLI: Intuitive command line interface (CLI) accessible via control port, Telnet, or modem
RT Clock: SNTP support and 8-hour power failure backup
|
| Protocols | DNS |
|
| Controls/Indicators | Status Indicators |
System
WAN
LAN
Reset button
|
|
| Power Description | Input Voltage | 220V AC |
| Input Voltage Range | 12V DC |
| Frequency | 50 Hz or 60 Hz |
| Power Consumption | 20W |
| Power Source | Power Supply |
|
| Environmental Conditions | Temperature | -20 °C (-4 °F) to 66 °C (150.8 °F) Storage |
| Humidity | 5% to 95% Non-condensing Relative Humidity Storage |
|
| Physical Characteristics | Compatible Rack Unit | 1U |
| Form Factor | Wall-mountable |
| Dimensions | 1.6" Height x 11.8" Width x 8.6" Depth |
| Shipping Dimensions | 3.5" Height x 7.5" Width x 11" Depth |
| Weight | 3.8 lb |
| Shipping Weight | 7.08 lb |
|
| Miscellaneous | Package Contents |
Q2200 T1 QoS Access Router
Documentation CD (includes Adobe Acrobat PDF versions of this manual, the User's Guide and the CLI Reference Guide)
AC - DC power adapter and cable for use in North America
One Ethernet LAN cable, Cat 5E, UTP 568B, 6'
Two #8 wood screws and anchors for wall-mounting the Router
|
| Additional Information |
Bandwidth Class-based Weighted Fair Queuing
Marking: Configurable QoS marking
Policies: 32 user-configurable QoS policies for prioritization by source and destination addresses, port, protocol, DiffServ Code Point (DSCP)
Monitoring: QoS traffic reports and graphs Configurable WAN Latency report
|
| System Requirements | For configuring the Router:
Computer with monitor, keyboard, and mouse
Internet browser software: Microsoft. Internet Explorer 5.5 or later; Netscape 7.1; or browser based on Mozilla 1.4 or later
Network interface card (NIC) for connection to an Ethernet port on the Router, or to an Ethernet LAN that will be connected to the Router
DHCP client setup, i.e., the computer automatically obtains its IP address from the Router
|
| Certifications & Standards |
ITU Q.933
ANSI T1.617
802.1P
802.1Q
FCC Part 68
FCC Part 15
Emissions:
FCC 47 CFR 15 Class A
Safety:
ANSI/UL 60950-1-2002
CAN/CSA-C22.2 No 60950-1-03
Terminal:
FCC 47 CFR 68
IC CS-03
|
|
| Warranty | 1 Year |
|
