The ADTRAN DSU 56/64 provides cost-effective solutions for termination of 56 or 64 Kbps DDS services. The units are a very economical solution for single port point-to-point, multi-point or Frame Relay applications. Extensive use of VLSI technology provides a highly reliable feature-rich DSU.
|
| Manufacturer |
Adtran |
| Manufacturer Part Number |
1200062L1 |
| Manufacturer Website Address |
www.adtran.com |
| Brand Name |
Adtran |
| Product Name |
DSU 56/64 DDS CSU/DSU |
| Technical Information | Operating Mode | Dedicated DDS Multipoint |
| Diagnostic Features | Local: DTE, DTE/Loop, DTE with test pattern, Loop only, test pattern
Remote: V.54 with or without 2047 test pattern |
|
| Interfaces/Ports | Ports | RJ-48S |
| Electrical Interface | Serial V.35 |
|
| Media & Performance | Data Transfer Rate | 56Kbps to 64Kbps Network |
|
| Power Description | Input Voltage | 115 V AC |
| Frequency | 60 Hz |
| Power Consumption | 4 W |
|
| Environmental Conditions | Temperature | -20 °C (-4 °F) to 70 °C (158 °F) Storage |
| Humidity | Up to 95% Non-condensing |
|
| Physical Characteristics | Form Factor | Rack-mountable |
| Dimensions | 1.62" Height x 6.5" Width x 8.25" Depth |
| Shipping Dimensions | 4" Height x 10.25" Width x 15.5" Depth |
| Weight | 1.5 lb |
| Shipping Weight | 3.31 lb |
|
| Miscellaneous | Package Contents | 8-pin to 8-pin modular cable
User manual |
| Additional Information | Provides cost-effective method for termination of DDS services
Internal power supply
Can be used for point to- point, multi-point, or Frame Relay applications
Easy to configure; all options set by easily accessible DIP switches
Multiple test and diagnostic features
Receiver Sensitivity: -45dB at all rates
Options:
- Set by DIP switch
- Loop Rate: 56 or 64 Kbps
- CTS: On or Normal
- CTS Delay: Short or Long (DSU 56/64)
- CD: On or Normal
- DSR: On or Normal
- Scrambler: On or Off
- Anti-Stream: On or Off (DSU 56/64)
- RDL: Enable or Disable
Line Requirements:
- Loop transmission parameters as defined in:
- AT&T PUB 62310: Dedicated DDS |
| Certifications & Standards | FCC Part 15 Class A
FCC Part 68
UL and CUL
Industry Canada CS03 |
|
| Warranty | 5 Year - North American |
|
