Tsu Quad Fxs+ Opt Mod 2 Gen

• Specs
• Site Review

The FXS Quad Voice option modules can be used with the ADTRAN TSU 100/120/600. The Quad FXS+ module provides four, 2-wire voice-grade interfaces serving as the source of line-current and ringing voltage to a telephone or station interface.
Manufacturer		Adtran
Manufacturer Part Number		1202300L1
Manufacturer Website Address		www.adtran.com
Brand Name		Adtran
Product Name		TSU Quad FXS Plus Module
Product Type		Voice Module
Interfaces/Ports	Interfaces/Ports	4 x FXS
	Interfaces/Ports Details	4 x RJ-45 FXS
Media & Performance	Data Transfer Rate	64Kbps
Management & Protocols	Management	The FXS+ is configured from the front panel of the TSU 100/120/600 or by an external personal computer (PC) program
Environmental Conditions	Temperature	0 to 45 Operating
	Humidity	95% Non-condensing Relative Humidity
Physical Characteristics	Form Factor	Hot-swappable
	Shipping Dimensions	2.75" Height x 8.25" Width x 13" Depth
	Shipping Weight	1.36 lb
Miscellaneous	Additional Information	Provides ring back and dial tone Supports loop resistances to 500 W Menu configurable Tx and Rx levels FXS, PLAR, Tandem, Single Party, and Universal Voice Grade operating modes Ground Start or Loop Start signalling Wink or Immediate Supervision in Tandem mode Wink delay for ANI/DNIS services Integral ringback and dial-tone generation Integral sinusoidal 20 Hz ring generation Full V.90 modem connect capability (56.6 kbps) Tests: Power-on circuit test Signal bits monitoring and setting 1 kHz test tone generation Force 2-wire port output state
	Compatibility	TSU 120 TSU 600 TSU 100
	Certifications & Standards	CSA FCC Part 15 Class B UL
Warranty		5 Year