The ADTRAN T1 ESF CSU is a full-featured T1 Channel Service Unit used to connect T1 data terminal equipment (DTE) such as a PBX, switch or channel bank to T1 facilities. Capable of interfacing to both B8ZS or AMI circuits, the T1 ESF CSU can convert signal formats or line code to integrate older equipment. The ESF CSU is designed to provide alarms, loopbacks, signal regeneration, line build-out, and surge protection, while maintaining 1's density for the DTE and T1 network.
|
| Manufacturer |
Adtran |
| Manufacturer Part Number |
1204025L1 |
| Manufacturer Website Address |
www.adtran.com |
| Brand Name |
Adtran |
| Product Name |
T1 ESF ACE CSU |
| Product Type |
T1 CSU |
| Technical Information | Data Encoding | AMI/B8ZS |
| Diagnostic Features | Performance Data:
BPVs/CRCs, ES, SES, UAS, %AS, %EF SEC
Alarms, Error Rates
Reports:
NI information stored 24 hrs, every 15 min.
PRMS:
ANSI Performance Report
Messages (User Selectable)
Test Local:
Payload/Line (NI), DTE (T1)
Test Remote:
Payload/Line (NI)
Test Patterns:
1:8, All 0's, All 1's |
|
| Interfaces/Ports | Ports | 1 x 8-pin RJ-48C Network
1 x 9-pin DB-9 RS-232 Management
1 x 8-pin RJ-48C DTE |
|
| Media & Performance | Data Transfer Rate | 1.54Mbps T1 |
|
| Management & Protocols | Management | SNMP
VT100 interface |
|
| Controls/Indicators | Status Indicators | Front Panel LCD
Power
Alarms
Errors
Loopback |
|
| Power Description | Input Voltage | 12 V DC to 48 V DC |
| Power Consumption | 2.5 W |
|
| Environmental Conditions | Temperature | 0 to 50 Operating
-20 to 70 Storage |
| Humidity | Up to 95% Non-condensing Relative Humidity |
|
| Physical Characteristics | Form Factor | Desktop
Wall-mountable Optional
Rack-mountable Optional |
| Dimensions | 2" Height x 9.3" Width x 6.5" Depth |
| Weight | 1 lb |
|
| Miscellaneous | Package Contents | T1 ESF CSU ACE
T1 Loopback Test Adapter
RJ45 Cable
AC wallmount power supply
Manual |
| Additional Information | Framing: SF/ESF
Equipment line build-out configuration 0-655 feet
Bantam Jacks:
Test Signal access to Network & DTE
Non-interrupt signal receive: Network & DTE |
| Certifications & Standards | FCC part 15 Class A Part 68
Industry Canada CS03
UL 1459
CUL
Compliance:
ANSI T1.403
AT&T 62411 |
|
| Warranty | 5 Year |
|
