The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to four video outputs for monitors using analog signals. The signal boost obtained by using the VS-134 allows you to not only split the signal but to extend the distance. This is no mean feat, your average VGA card, over a standard VGA cable, send a clear VGA signal approximately 25 feet. This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well.
Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a givin signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call. These units have a bandwidth of 350MHz (which is 350 million cycles per second) and that is almost 60 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high resolution setting of 1920 x 1440 in 24 or 32 bit true color mode at a refresh rate of 80Hz.
|
| Manufacturer |
Aten Technologies |
| Manufacturer Part Number |
VS134 |
| Manufacturer Website Address |
www.aten-usa.com |
| Brand Name |
Aten |
| Product Name |
4 Port Video Splitter |
| Product Type |
VGA Splitter |
| Technical Information | Number of Computers | 1 |
| Number of Monitors | 4 Direct |
| Graphics Modes | VGA
SVGA
XGA
SXGA |
| Graphics Resolution | 1920 x 1440 @ 80Hz Maximum
1600 x 1200 |
| Video Bandwidth | 350MHz -3dB |
| Operating Range | 210 ft Maximum |
|
| Interfaces/Ports | 1 x 15-pin D-Sub (HD-15) Computer
4 x 15-pin D-Sub (HD-15) Monitor |
|
| Controls/Indicators | Status Indicators | 1 x Power |
|
| Power Description | Input Voltage | 9 V DC
110 V AC or 220 V AC 10 |
| Input Current | 120 mA @ |
| Frequency | 50 Hz or 60 Hz |
| Power Consumption | 2.7W |
|
| Physical Characteristics | Color | White |
| Form Factor | External |
| Dimensions | 2.04" Height x 8.81" Width x 5.98" Depth |
| Shipping Dimensions | 4" Height x 8.5" Width x 13" Depth |
| Weight | 2.53 lb |
| Shipping Weight | 3.85 lb |
|
| Miscellaneous | Package Contents | 1 x Video Splitter (VS-134)
1 x AC 9V Power Adapter
1 x User Manual |
| Additional Information | Daisy Chainable
Supports one XGA Port (Video Out 1)
DDC Compatible (If you connect a DDC type monitor to Video Out 1, all other monitors must be able to support the highest video resolution that the DDC monitor can provide.) |
| System Requirements | Hardware Requirements:
One or more XGA, SVGA, VGA, and/or Multisync compatible analog monitor(s) with standard PC high density cables having 15 pin D type male connectors
One XGA, SVGA, VGA, and/or Multisync analog video card having a standard PC 15 pin D type female connector
Note:
- This product is not suitable for CGA, EGA, or Monochrome type monitors using a digital video signal
- UL-2919 rated cable is recommended for the best video quality
|
| Compatibility | PC |
| Certifications & Standards | FCC Part 15 Class A |
|
| Warranty | 3 Year Limited |
|
