Cisco Catalyst 2960-24TC-S Switch with LAN Lite software fixed configuration, standalone switch provide desktop Fast Ethernet connectivity for entry level wiring closet and small branch office networks. The Cisco Catalyst 22960-24TC-S LAN Lite Switch simplify the migration from non-intelligent hubs and unmanaged switches to a fully scalable managed network. The LAN Lite Cisco IOS Software provides entry level security, quality of service (QoS), and availability capabilities while lowering the network total cost of ownership.
|
| Manufacturer |
Cisco Systems, Inc |
| Manufacturer Part Number |
WS-C2960-24TC-S |
| Manufacturer Website Address |
www.cisco.com |
| Brand Name |
Cisco |
| Product Line |
Catalyst |
| Product Series |
2960 |
| Product Model |
2960-24TC-S |
| Product Name |
Catalyst 2960-24TC-S Managed Ethernet Switch |
| Product Type |
Ethernet Switch |
|
| Interfaces/Ports | Total Number of Network Ports | 24 |
| Uplink Port | Yes |
| Number of Network (RJ-45) Ports | 24 |
|
|
| Media & Performance | Media Type Supported | Twisted Pair |
| Twisted Pair Cable Standard | Category 5 |
| Ethernet Technology | Fast Ethernet |
| Network Technology | 10Base-T
100/1000Base-T |
|
|
| I/O Expansions | Number of Total Expansion Slots | 2 |
| Expansion Slot Type | SFP |
| Number of SFP Slots | 2 |
|
|
| Network & Communication | Layer Supported | 2 |
|
|
| Management & Protocols | Manageable | Yes |
| Management | CLI Syslog DHCP SNMPv1, v2c, and v3 Telnet Web browser Express Setup Cisco Network Assistant IEEE 802.1p QoS IEEE 802.1Q VLAN RMON (history, statistics, alarms, and events) CiscoWorks LAN Management Solution Cisco Identity-Based Networking Services |
|
|
| Memory | Standard Memory | 64 MB |
| Memory Technology | DRAM |
| Flash Memory | 32 MB |
|
|
| Power Description | Input Voltage | 110 V AC
220 V AC |
| Power Source | Power Supply |
|
|
| Physical Characteristics | Height | 1.7" |
| Width | 17.5" |
| Depth | 9.3" |
| Weight (Approximate) | 8.00 lb |
|
|
| Miscellaneous | Package Contents | Catalyst 2960-24TC-S Managed Ethernet Switch Catalyst 2960 Switch Getting Started Guide Regulatory Compliance and Safety Information for the Catalyst 2960 Switch AC power cord 1 x RJ-45-to-DB-9 adapter cable Mounting kit that contains: - 4 x Rubber feet for mounting the switch on a table
- 2 x 19-inch rack-mounting brackets (also used for wall mounting)
- 6 x Phillips flat-head screws for attaching the brackets to the switch
- 4 x Phillips machine screws for attaching the brackets to a rack
- 1 x Cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
- 1 x Redundant power system (RPS) connector cover
- 2 x Phillips pan-head screws (for attaching the RPS cover)
- 4 x Phillips truss-head screws (for wall-mounting brackets)
|
|
|
| Warranty | Limited Warranty | Lifetime |
|
