The Cisco Catalyst 3560V2-48PS Layer 3 Switch is the next-generation energy-efficient Layer 3 fast Ethernet switch. This switch supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560V2-48PS Layer 3 Switch consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.
|
| Manufacturer |
Cisco Systems, Inc |
| Manufacturer Part Number |
WS-C3560V2-48PS-E |
| Manufacturer Website Address |
www.cisco.com |
| Brand Name |
Cisco |
| Product Line |
Catalyst |
| Product Series |
3560 |
| Product Model |
3560V2-48PS |
| Product Name |
Catalyst 3560V2-48PS Layer 3 Switch |
| Product Type |
Layer 3 Switch |
| Interfaces/Ports | Number of Ports | 48 |
| Fast Ethernet Port | Yes |
| Interfaces/Ports | 48 x RJ-45 10/100Base-TX PoE LAN
1 x RJ-45 Console Management |
|
| I/O Expansions | Number of Expansion Slots | 4 |
| Expansion Slots | (4 Total) SFP (mini-GBIC) |
|
| Network & Communication | Layer Support | 2 to 3 |
|
| Management & Protocols | Manageable | Yes |
| Management | Web Based Management
Command Line Interface
Telnet
SNMP v1/2c/3
RMON 1/2/3/9
MIB-II
DHCP
IEEE 802.1p QoS
IEEE 802.1q VLAN
Cisco Group Management Protocol
Cisco Network Assistant
CiscoWorks LAN Management Solution (LMS)
|
|
| Memory | Flash Memory | 32MB |
|
| Software | Operating System | Cisco IOS Software |
|
| Power Description | Power Over Ethernet | Yes |
| Input Voltage | 110V AC
220V AC |
| Input Voltage Range | 100V AC to 240V AC |
| Power Source | Power Supply |
| Redundant Power Supply | Yes |
|
| Physical Characteristics | Compatible Rack Unit | 1U |
| Form Factor | Rack-mountable |
| Dimensions | 1.73" Height x 17.46" Width x 11.62" Depth |
| Weight | 11.02 lb |
|
| Miscellaneous | Additional Information | Enhanced Image
Forwarding bandwidth: 32 Gbps
370W available for PoE, allowing full 15.4W for up to 24 ports
Cisco Hot Standby Router Protocol (HSRP)
Unidirectional Link Detection Protocol (UDLD)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
Equal-cost routing (ECR) provides load balancing and redundancy
Basic IP unicast routing protocols (static, RIPv1, RIPv2, and EIGRP-Stub)
IPv6 unicast routing capability (static, RIP, OSPF, and EIGRP)
Security Features:
IEEE 802.1x
Multi-authentication (MultiAuth)
Flexible authentication (FlexAuth)
Access Control Lists
SSHv2
|
|
