The Cisco Catalyst 3560V2-48TS Layer 3 Switch is the next-generation energy-efficient Layer 3 fast Ethernet switch. This switch supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560V2-48TS Layer 3 Switch consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.
|
| Manufacturer |
Cisco Systems, Inc |
| Manufacturer Part Number |
WS-C3560V2-48TS-E |
| Manufacturer Website Address |
www.cisco.com |
| Brand Name |
Cisco |
| Product Line |
Catalyst |
| Product Series |
3560 |
| Product Model |
3560V2-48TS |
| Product Name |
Catalyst 3560V2-48TS Layer 3 Switch |
| Product Type |
Layer 3 Switch |
| Interfaces/Ports | Number of Ports | 48 |
| Fast Ethernet Port | Yes |
| Interfaces/Ports | 48 x RJ-45 10/100Base-TX LAN
1 x RJ-45 Console Management |
|
| I/O Expansions | Number of Expansion Slots | 4 |
| Expansion Slots | (4 Total) SFP (mini-GBIC) |
|
| Network & Communication | Layer Support | 2 to 3 |
|
| Management & Protocols | Manageable | Yes |
| Management | Web Based Management
Command Line Interface
Telnet
SNMP v1/2c/3
RMON 1/2/3/9
MIB-II
DHCP
IEEE 802.1p QoS
IEEE 802.1q VLAN
Cisco Group Management Protocol
Cisco Network Assistant
CiscoWorks LAN Management Solution (LMS)
|
|
| Memory | Flash Memory | 32MB |
|
| Software | Operating System | Cisco IOS Software |
|
| Power Description | Input Voltage | 110V AC
240V AC |
| Input Voltage Range | 100V AC to 240V AC |
| Power Source | Power Supply |
| Redundant Power Supply | Yes |
|
| Physical Characteristics | Compatible Rack Unit | 1U |
| Form Factor | Rack-mountable |
| Dimensions | 1.73" Height x 17.46" Width x 11.62" Depth |
| Weight | 8.82 lb |
|
| Miscellaneous | Additional Information | Enhanced Image
Forwarding bandwidth: 32 Gbps
Cisco Hot Standby Router Protocol (HSRP)
Unidirectional Link Detection Protocol (UDLD)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
Equal-cost routing (ECR) provides load balancing and redundancy
Basic IP unicast routing protocols (static, RIPv1, RIPv2, and EIGRP-Stub)
IPv6 unicast routing capability (static, RIP, OSPF, and EIGRP)
Security Features:
IEEE 802.1x
Multi-authentication (MultiAuth)
Flexible authentication (FlexAuth)
Access Control Lists
SSHv2
|
|
