Cisco's industry-standard Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port/slot, linking the port with the fiber-optic network. GBICs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of IEEE 802.3z- compliant 1000BaseSX, 1000BaseLX/LH, or 1000BaseZX interfaces on a port-by-port basis. Furthermore, Cisco is offering a 1000BaseLX/LH interface that is fully compliant with the IEEE 802.3z 1000BaseLX standard, but has the ability to go up to 10 km over single-mode fiber, 5 km further than garden-variety 1000BaseLX interfaces. As additional capabilities are developed, these modules make it easy to upgrade to the latest interface technology, maximizing investment protection.
|
| Manufacturer |
ACP - Memory Upgrades |
| Manufacturer Part Number |
WS-G5484-AA |
| Manufacturer Website Address |
www.acp-ep.com |
| Brand Name |
ACP - Memory Upgrades |
| Product Name |
WS-G5484-AA 1000Base-SX GBIC |
| Product Type |
GBIC |
| Interfaces/Ports | Interfaces/Ports | 1 x 1000Base-SX LAN |
| Interfaces/Ports Details | 1 x SC 1000Base-SX LAN |
|
| Media & Performance | Connectivity Media | 62.5 µm Multi-mode Fiber 1000Base-SX |
| Distance Support | 722 ft 62.5 µm Fiber 160MHz |
| Data Transfer Rate | 1Gbps Gigabit Ethernet |
|
| Environmental Conditions | Temperature | -40 °F (-40 °C) to 185 °F (85 °C) Storage |
|
| Physical Characteristics | Dimensions | 0.39" Height x 1.18" Width x 2.56" Depth |
| Shipping Dimensions | 11" Depth |
| Weight | 0.06 lb |
| Shipping Weight | 0.3 lb |
|
| Miscellaneous | Additional Information |
GBIC Channel Insertion Loss:
- Transmitter output power (minimum/maximum): 0/-9.5 dBm
- Receiver maximum input power: 0 dBm
- Receiver sensitivity: -17 dBm
- 50 micron MMF: 3.4 dB
- 62.5 micron MMF: 3.2 dB
Contains a Class 1 laser of 850 nm for 1000BASE-SX
(short-wavelength) applications
Connector polishing:
- The SX GBIC uses ball lenses and an air gap. A flat polish on the
fiber-optic interface connectors is suggested
|
| Compatibility |
Cisco Catalyst 4000
Cisco Catalyst 5000
Cisco Catalyst 6000
|
| Certifications & Standards |
IEEE 802.3z
Regulatory and Standards Compliance:
- Safety - Laser Class I 21CFR1040
|
|
