Connects switches, hubs and workstations via fiber
Supports EIA/TIA 568 RJ45 category 5 wiring and features a crossover switch for convenient uplinks.
Software-independent
|
| Manufacturer |
Omnitron Systems Technology |
| Manufacturer Part Number |
4332-1 |
| Manufacturer Website Address |
www.omnitron-systems.com |
| Brand Name |
Omnitron |
| Product Line |
FlexPoint |
| Product Name |
FlexPoint Media Converter |
| Product Type |
Media Converter |
| Interfaces/Ports | Number of Ports | 2 |
| Interfaces/Ports | 1 x ST |
|
| Media & Performance | Connectivity | Fiber |
| Connectivity Media | 100Base-FX 1310 nm Multi-mode Fiber |
| Distance Support | 1.2Mile |
|
| Network & Communication | Network Technology | 100Base-FX |
|
| Management & Protocols | Protocols | Fast Ethernet |
|
| Controls/Indicators | Status Indicators | Power: LED, Yellow, power applied
Auto-Negotiation: LED, Green, Auto-Negotiation enabled
Full-Duplex: LED, Green, Full-Duplex selected
Half-Duplex: LED, Green, Half-Duplex selected
Fiber Link/ Receive: LED, Green, Link/ data received
Fiber Error: LED, Red, data errors detected on fiber
UTP Link/ Receive: LED, Green, Link/ data received
UTP Error: LED, Red, data errors detected on UTP |
|
| Power Description | Input Voltage | 110 V AC |
| Input Current | 500 mAor 750 mA |
| Frequency | 60 Hz |
|
| Environmental Conditions | Temperature | -40 °F (-40 °C) to 176 °F (80 °C) Storage |
| Humidity | 0 to 90% Non-condensing Operating |
|
| Physical Characteristics | Color | White |
| Form Factor | Wall-mountable |
| Dimensions | 1" Height x 1" Width x 4" Depth |
| Shipping Dimensions | 1" Height x 3" Width x 5" Depth |
| Weight | 0.37lb |
|
| Miscellaneous | Package Contents | Power Adapter Kit: 110 Volt / 60 Hz |
| Additional Information | Auto-negotiates half-duplex (HD) or full-duplex (FD) operation to maximize data transfer speed and distance between connected devices.
The FlexPoint 100Fx/Tx auto-adapts to the highest level of performance supported by the device connected to the UTP port. When the device is a switch or a workstation that supports full duplex, the FlexPoint 100Fx/Tx adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that only supports half duplex, the FlexPoint 100Fx/Tx adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation.
Switches:
UTP Crossover: Straight/ Crossed
UTP Auto-Negotiation: Auto-Negotiation/ Manual
Duplex Mode: Full-Duplex/ Half-Duplex |
| Certifications & Standards | IEEE 802.3-LAN
IEEE 802.3U-LAN |
|
| Warranty | Warranty | Lifetime Limited |
| Parts Warranty/Labor | Lifetime |
|
