- Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
- Two high-speed 16550 UART serial ports DB9 (9-pin) support data rate up to 230Kbps
- Works as standard RS232 port or with 5V or 12V power
output for devices that require power (such as handheld scanners, table
scanners, POS displays, etc.). Configurable via jumpers with
silk-screened settings on PCB
- Standard height and low profile brackets are included
|
| Manufacturer |
Siig, Inc |
| Manufacturer Part Number |
JJ-P00311-S1 |
| Manufacturer Website Address |
www.siig.com |
| Brand Name |
Siig |
| Product Name |
DP CyberSerial Dual PCI RJ |
| Packaged Quantity |
1 |
| Packing |
Box |
| Package Type |
Bulk |
| Product Type |
Serial Adapter |
| Technical Information | Host Interface | PCI |
| Data Transfer Rate | Up to 230Kbps |
| Buffer | 32Byte |
| Baud Rate | 230Kbps |
| UART Type | 16550 Standard |
| IRQ | Sharing |
| Controller Type | CyberPro |
| Platform Support | PC |
|
| Interfaces/Ports | Ports | 2 x 9-pin DB-9 Male RS-232 Serial |
|
| Physical Characteristics | Form Factor | Low-profile Internal |
| Shipping Dimensions | 8.62" Width x 6.31" Height x 1.5" Depth |
| Shipping Weight | 0.8 lb |
|
| Miscellaneous | Package Contents | - DP CyberSerial Dual PCI RJ
- Spare enhanced low profile bracket
- RJ-45 to RS232 (9-pin) cable
- Driver CD
- User's manual
|
| Additional Information | - Regulatory approval(s): FCC Class B (DoC) & CE
- RoHS compliant
- Chip: CyberPro
- Bus type: 32-bit PCI
- Port type: Two 9-pin RS232 serial ports
- IRQ sharing reduces IRQ conflicts
- Built-in 32-byte FIFO buffers dramatically increase data
transmit/receive speed, especially under Windows multitasking
environment
- 4-layer PCB board: separate layers for data & grounding.
Greatly reduces signal noise & loss. Delivers more reliable
high-speed data transfers
- Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
- Supports 3.3V operation with 5V tolerance
- Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible
- Supports PME # (Power Management Event). Allows device to request a change in system power state (wake up system)
|
| System Requirements | - Pentium® or equivalent computer with an available 32-/64-bit PCI or PCI-X slot
- Windows® 95 / 98 / 98SE / ME / NT 4.0 / 2000 / XP (32-/64-bit) / Server 2003 (32-/64-bit) / Vista (32-/64-bit)
|
| Certifications & Standards | FCC, CE, RoHS |
|
| Warranty | Lifetime Repair/Replace |
|
