- A low profile form factor PCI card made for space constrained system designs
- Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
- One high-speed 16550 UART serial port (9-pin) supports data rate up to 230 Kbps
- Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB
- Includes support for DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003, & Linux Kernel 2.4.x or later
|
| Manufacturer |
Siig, Inc |
| Manufacturer Part Number |
LP-P01D11-S6 |
| Manufacturer Website Address |
www.siig.com |
| Product Name |
Low Profile PCI-1S+DOS |
| Packaged Quantity |
1 |
| Packing |
Box |
| Package Type |
Bulk |
| Product Type |
Serial Adapter |
| Technical Information | Host Interface | PCI |
| Data Transfer Rate | Up to 230Kbps Serial Port |
| Buffer | 32Byte |
| Baud Rate | 230KbpsUp to |
| UART Type | 16550 Standard |
| IRQ | IRQ sharing |
| Controller Type | CyberPro |
| Platform Support | Linux |
|
| Interfaces/Ports | Ports | 1 x 9-pin DB-9 Female RS-232 Serial |
|
| Power Description | Input Voltage | 3.3 Vto 5 V |
|
| Physical Characteristics | Form Factor | Low-profile Plug-in Card |
| Shipping Dimensions | 8.62" Width x 6.31" Height x 1.5" Depth |
| Shipping Weight | 0.8 lb |
|
| Miscellaneous | Package Contents |
- Low Profile PCI-1S+DOS card
- Driver CD
- User's manual
|
| Additional Information |
- Regulatory approval(s): FCC Class B (DoC) & CE
- Chip: CyberPro
- Bus type: 32-bit PCI
- Port type: One 9-pin RS232 serial port
- Built-in 32-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
- 4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers
- Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
- Supports 3.3V operation with 5V tolerance
- Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible
- Supports PME # (Power Management Event). Allows device to request a change in system power state (wake up system)
- Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability
- Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliabiilty
|
| System Requirements |
- Pentium or equivalent computer with an available 32-/64-bit PCI or PCI-X slot
- DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003
- Linux Kernel 2.4.x or later
|
| Certifications & Standards | FCC Class B, CE, RoHS |
|
| Warranty | Lifetime Repair/Replace |
|
