This Dual SATA External Hard Drive Enclosure delivers the ideal external RAID solution, allowing you to install two 3.5in SATA hard drives, connected to the host computer through either eSATA or USB 2.0. For true eSATA convenience, the enclosure features built-in port multiplier support, allowing both of the installed Serial ATA drives to be connected to the host computer through a single eSATA cable. A versatile external storage solution, the enclosure supports any 3.5in SATA hard drive up to 2.0 TB in capacity for a combined total capacity of 4TB, and can be connected to a computer through USB 2.0, if an eSATA connection is not available. The enclosure supports multiple RAID array configurations including RAID 0, RAID 1, BIG(JBOD), SAFE33 & SAFE55 - allowing you to configure your external drives to best suit the application.
Manufacturer
StarTech.com
Manufacturer Part Number
SAT3520U2ER
Manufacturer Website Address
www.startech.com
Brand Name
StarTech.com
Product Name
eSATA/USB Hard Drive Array
Product Type
Hard Drive Array
Storage
Storage Capacity
3TB Maximum
Hard Drive
Not Included
Controllers
Controller
RAID Controller
RAID Levels
0 1 JBOD
Interfaces/Ports
Ports
1 x 7-pin Serial ATA/300 - eSATA 1 x 4-pin Type A USB 2.0 - USB
Power Description
Input Voltage
110V AC 220V AC
Input Voltage Range
100 V AC to 240 V AC
Physical Characteristics
Form Factor
External
Dimensions
2.95" Height x 2.91" Width x 7.83" Depth
Weight
35.45 oz
Miscellaneous
Additional Information
Supports two SATA I/II 3.5" Hard Drives with combined capacity of up to 4 TB using two 2.0 TB SATA hard drives. Note: Only 2 TB capacity supported in RAID 0
