| Chassis [CSE-815TQ-R650UB] CHAS 1U 815TQ UIO BLK 4X SATA 650W Redundant PSU |  | | | Superior design and uncompromising quality control enabled Supermicro to offer high-end products with unsurpassable performance to the market since its founding in 1993. With this unbeatable track record, Supermicro has earned a reputation as a manufacturing leader in the industry. Supermicro strives to build long-term relationships with customers by providing them with outstanding engineering innovations, quality, availability, and reliability in today's mission-critical fast-paced e-world. | | | General | | Form Factor | Rack-mountable - 1 U
| | Supported Mainboard Form Factor | Extended ATX | | Front Accessible Bays Qty | 3 | | Hot-Swap Bays Qty | 4 | | Built-in Devices | LED panel, floppy drive , CD-ROM drive | | Width | 17.2 in | | Depth | 25.6 in | | Height | 1.7 in | | Weight | 40 lbs | | Color | Black | | Fans | 4x 4cm counter-rotating fans | | System Cabinet Features | Chassis intrusion detection | | Expansion / Connectivity | Drive Bays
| 4x 1" SAS / SATA Hot-swap drive trays 3.5" 1.44MB Slim Floppy Drive (Optional) Slim 24x CDROM Drive | | Expansion Slots Total (Free) | 1x low-profile PCI expansion slot (with Riser Card) 1x full-height, full-length PCI expansion slot (with Riser Card) 1XUIO Slot PCI-E x8 | | Miscellaneous | | Compliant Standards | CE, UL, TUV, cUL, EN 60950, IEC 60950, FCC | | Power | | Power Device | Power supply Redundent 650watt
| | Installed Qty | 2 | | Max Supported Qty | 2 | | Voltage Required | AC 120/230 V ( 50/60 Hz ) | | Power Provided | 650 Watt
| | Environmental Parameters | | Min Operating Temperature | 50 °F | | Max Operating Temperature | 95 °F | | Humidity Range Operating | 8 - 90% | |
| Motherboard [MBD-X7DVL-E-O] ATX MBD X7DVLE INTEL5000V 16GB DDR2 6 SATA 3.0 VGA |   |  |  |  |  | | MBD-X7DVL-E-O | - X7DVL-E (Standard Retail Pack)
| | MBD-X7DVL-E-B | | | |  | | Form Factor | | | Dimensions | - 12" x 10" (30.5cm x 25.4cm)
| | |  | | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 5100/5000 sequence (Woodcrest/Dempsey processor) with 2MB L2 Integrated Advanced Transfer Cache per core, 4MB L2 cache total, up to 3.73 GHz
| | System Bus | - 1333 / 1066 / 667 MHz system bus
| | |  | | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
| | Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | |  | | Chipset | - Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIM1U)
- (Optional: AOC-SIMLC, AOC-SIM1U)
| | Network Controllers | - Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 16 MB of video memory
| | Super I/O | | | |  | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- Total 6 USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | Parallel Port | - 1 Header for ECP / EEP parallel port
| |  |  |  | | 1U Chassis | - SC811T-520
- SC512F-520 (Mini 1U)
| | 2U Chassis | - SC825TQ-R700LPV
- SC825TQ-560LP
- SC823T-550LP
| | Tower / 4U Rackmount | - SC743TQ-R760
- SC743T-650
- SC743T-645 (FAN-0091 required)
- SC743i-645 (FAN-0091 required)
| | Mid-Tower | - SC733TQ-645 (MCP-310-00010-01 air shroud required)
- SC733T-645
- SC733i-645
| | Important Chassis Notes | - To ensure system stability, a 500W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required] | | |  | | PCI-Express | - 1 (x8) PCI-e slot
- 1 (x4) PCI-e (using x8) slot
| | PCI-X | - 2x 64-bit 133/100MHz PCI-X (3.3V) slots
| | PCI | - 2x 32-bit 33MHz PCI (3.3V) slots
| | |  | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
| | |  | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
Doctor III - Watch Dog
- NMI
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
| | |  | | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of six 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| | | RoHS
|  | | | |
|
|