Transition Networks' full-featured 100BASE-TX to 100BASE-FX Media Converters, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before.
|
| Manufacturer |
Transition Networks, Inc |
| Manufacturer Part Number |
CFETF1011-105 |
| Manufacturer Website Address |
www.transition.com |
| Brand Name |
Transition Networks |
| Product Name |
Fast Ethernet Point System Slide-In-Module Media Converter |
| Product Type |
Media Converter |
| Interfaces/Ports | Number of Ports | 2 |
| Interfaces/Ports | 1 x ST Duplex |
|
| Media & Performance | Connectivity | Fiber |
| Connectivity Media | 100Base-FX 1300 nm Multi-mode Fiber |
| Distance Support | 1.24Mile |
|
| Network & Communication | Network Technology | 100Base-FX |
|
| Management & Protocols | Management |
Use SNMP at an attached terminal or at a remote location to monitor the Media
Converter by monitoring:
- Media Converter power
- Copper link and fiber link status
- Hardware switch settings
Fault Condition
Use SNMP to enter network commands that:
- Enable/disable
- Full- / Half-Duplex
- Enable/disable
- Link Pass-Through (LPT)
- Power down the Media Converter
|
| Protocols | Fast Ethernet |
|
| Controls/Indicators | Status Indicators | Unit LED:
PWR
Port LEDs:
TX (Link Copper)
FX (Link Fiber)
|
|
| Power Description | Power Consumption | 3.4 W |
|
| Environmental Conditions | Temperature | -4 °F (-20 °C) to 185 °F (85 °C) Storage |
| Humidity | 5 to 95% Non-condensing |
| Altitude | 0 ft to 10000 ft |
|
| Physical Characteristics | Form Factor | Internal |
| Dimensions | 3.4" Height x 3.4" Width x 5" Depth |
| Shipping Dimensions | 2" Height x 5" Width x 8.5" Depth |
| Weight | 8oz |
| Shipping Weight | 1 lb |
|
| Miscellaneous | Additional Information |
Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter; unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration.
Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.
Deploy fiber in a strategic and economical manner by using Fast Ethernet converter. Fast Ethernet converter can extend distances that copper cannot reach. This Converter can be used in
conjunction with lower cost copper based equipment to extend fiber to remote users.
Fiber Optic Connector Specs:
Min TX PWR: -19.0 dBm
Max TX PWR: -14.0 dBm
RX Sensitivity: -30.0 dBm
Max In PWR: -14.0 dBm
Link Budget: 11.0 dB
|
| Compatibility |
Point System chassis
|
| Certifications & Standards |
IEEE 802.3
CE Mark
FCC Class A
CISPR Class A
VCCI Class 1
FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A)
FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B)
|
|
| Warranty | Warranty | Lifetime Limited |
| Parts Warranty/Labor | Lifetime - Limited |
| Additional Warranty Information |
This warranty covers the original user only and is not transferable
|
|
