Transition Networks' full-featured 100Base-TX to 100Base-FX Media Converter, cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks is easier than ever before.
|
| Manufacturer |
Transition Networks, Inc |
| Manufacturer Part Number |
CFETF1014-105 |
| Manufacturer Website Address |
www.transition.com |
| Brand Name |
Transition Networks |
| Product Name |
Fast Ethernet Point System Slide-In-Module Media Converter |
| Product Type |
Media Converter |
| Interfaces/Ports | Number of Ports | 2 |
| Interfaces/Ports | 1 x SC |
|
| Media & Performance | Connectivity | Fiber |
| Connectivity Media | 100Base-FX 1300 nm Single-mode Fiber |
| Distance Support | 12.42Mile |
|
| Network & Communication | Network Technology | 100Base-FX |
|
| Management & Protocols | Management |
Use SNMP at an attached terminal or at a remote location to monitor the Media Converter by monitoring:
- Media Converter power
- Copper link and fiber link status
- Hardware switch settings
- Fault Condition
Use SNMP to enter network commands that:
- Enable/disable
- Full- / Half-Duplex
- Enable/disable
- Link Pass-Through (LPT)
- Power down the Media Converter
|
| Protocols | Fast Ethernet |
|
| Controls/Indicators | Status Indicators | Unit LED:
PWR
Port LEDs:
LKF(Fiber Link)
RXF(Fiber Receive)
RXC(Copper Receive)
LKC(Copper Link)
|
|
| Power Description | Power Consumption | 3.4 W |
|
| Environmental Conditions | Temperature | -4 °F (-20 °C) to 185 °F (85 °C) Storage |
| Humidity | 5 to 95% Non-condensing |
| Altitude | 0 ft to 10000 ft |
|
| Physical Characteristics | Form Factor | Internal |
| Dimensions | 3.4" Height x 3.4" Width x 5" Depth |
| Shipping Dimensions | 2" Height x 5" Width x 8.5" Depth |
| Shipping Weight | 1 lb |
|
| Miscellaneous | Additional Information |
Only Transition Networks guarantees compatibility with any 10/100 compliant port. This feature allows you to force the proper port configuration through an external switch on the converter; unlike competitive products that ship in auto-negotiation mode and may require both hardware and software configuration.
Automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub.
Fiber Optic Connector Specs:
Min TX PWR: -15.0 dBm
Max TX PWR: -8.0 dBm
RX Sensitivity: -31.0 dBm
Max In PWR: -8.0 dBm
Link Budget: 16.0 dB
|
| Compatibility |
PointSystem chassis
|
| Certifications & Standards |
IEEE 802.3
CE Mark
FCC Class A
CISPR Class A
VCCI Class 1
FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A)
FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B)
|
|
| Warranty | Warranty | Lifetime Limited |
| Parts Warranty/Labor | Lifetime - Limited |
| Additional Warranty Information |
This warranty covers the original user only and is not transferable
|
|
