Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before.
|
| Manufacturer |
Transition Networks, Inc |
| Manufacturer Part Number |
E-TBT-FRL-05(SC) |
| Manufacturer Website Address |
www.transition.com |
| Brand Name |
Transition Networks |
| Product Name |
10BASE-T to 10BASE-FL Media Converter |
| Product Type |
Media Converter |
| Interfaces/Ports | Number of Ports | 2 |
| Interfaces/Ports | 1 x SC Duplex |
|
| Media & Performance | Connectivity | Fiber |
| Connectivity Media | 10Base-FL 850 nm Multi-mode Fiber |
| Distance Support | 1.24Mile |
|
| Network & Communication | Network Technology | 10Base-FL |
|
| Management & Protocols | Protocols | Ethernet |
|
| Controls/Indicators | Status Indicators | Unit LED:
Power: Lit for normal operation
Port LEDs:
Link: Lit LED indicates unit is receiving link pulses from a compliant device
Receive: Flashing or lit LED indicates packets are being received |
|
| Power Description | Input Voltage | 9 V DC |
|
| Environmental Conditions | Temperature | -13 °F (-25 °C) to 185 °F (85 °C) Storage |
| Humidity | 5 to 95% Operating |
| Altitude | 0 ft to 10000 ft Operating |
|
| Physical Characteristics | Dimensions | 1" Width |
| Shipping Dimensions | 3" Height x 9.5" Width x 10" Depth |
| Weight | 2lb |
| Shipping Weight | 2 lb |
|
| Miscellaneous | Additional Information | LANart Inside:
Select Transition Networks' product now use LANart's state-of-the-art ASIC technology. These chips go beyond the functions provided by off-the-shelf-silicon used by our competitors, to incorporate enhancements specific to media conversion technology such as link fault propagation and indicators for power, data and link status.
AutoCross Technology:
AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration.
LinkAlert:
Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management.
Switches:
S1: Enables/disables LinkAlert
Fiber Optic Connector:
Min TX PWR: -16.0 dBm
Max TX PWR: -10.0 dBm
RX Sensitivity: -32.5 dBm
Max In PWR: -8.0 dBm
Link Budget: 16.5 dB |
| Certifications & Standards | IEEE 802.3® 10BASE-T; 10BASE-FL
UL Listed
C-UL Listed (Canada)
CISPR/EN55022 Class A
FCC Class A
CE Mark |
|
| Warranty | Warranty | Lifetime Limited |
| Parts Warranty/Labor | - Lifetime |
| Additional Warranty Information | Effective for Products Shipped May 1, 1999 and After. Every Transition Networks' labeled product purchased after May 1, 1999 will be free from defects in material and workmanship for its lifetime. This warranty covers the original user only and is not transferable.
This warranty does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling, including over-voltage failures caused by use outside of the product's specified rating, or normal wear and tear of mechanical components. If the user is unsure about the proper means of installing or using the equipment, contact Transition Networks' free technical support services. |
|
