Remote management in a stand-alone device. When used in conjunction with a managed Point System chassis, this stand-alone unit can be managed remotely.
|
| Manufacturer |
Transition Networks, Inc |
| Manufacturer Part Number |
SSDTF1013-105 |
| Manufacturer Website Address |
www.transition.com |
| Brand Name |
Transition Networks |
| Product Name |
Remotely Managed Stand Alone Media Converter |
| Product Type |
Media Converter |
| Interfaces/Ports | Number of Ports | 2 |
| Interfaces/Ports | 1 x SC |
|
| Media & Performance | Connectivity | Twisted Pair |
| Connectivity Media | T1/E1 850 nm Multi-mode Fiber |
| Distance Support | 1.24Mile |
|
| Network & Communication | Network Technology | T1/E1 |
|
| Management & Protocols | Management |
Remote unit in-band management
|
|
| Controls/Indicators | Status Indicators | Unit LED:
PWR:
Port LEDs:
SDC:
- Steady LED indicates copper link is up; Flashing LED (once/second) indicates transmitting on link if other link is down; Flashing LED (5 times/second) indicates All Ones detected on Link.
SDF:
- Steady LED indicates fiber link is up; Flashing LED (once/second) indicates transmitting on link if other link is down; Flashing LED (5 times/second) indicates All Ones detected on Link
|
|
| Power Description | Input Voltage | 9 V DC Device |
| Input Current | 5 A @9V DC |
|
| Environmental Conditions | Temperature | 32 °F (0 °C) to 122 °F (50 °C) Operating |
| Humidity | 5 to 95% Non-condensing |
| Altitude | 0 ft to 10000 ft |
|
| Physical Characteristics | Form Factor | Wall-mountable |
| Dimensions | 3.25" Height x 3.25" Width x 4.8" Depth |
| Shipping Dimensions | 3" Height x 9.5" Width x 12" Depth |
| Shipping Weight | 2 lb |
|
| Miscellaneous | Additional Information | Remote converter status:
Fiber Link Status
Copper Link Status
Hardware switch settings: LBO, AIS Copper, AIS Fiber, HW/SW
AIS detected Fiber
AIS detected Copper
Model Number
Fiber Connector
Copper Connector
Remote commands:
Loop-back Fiber
Loop-back Copper
AIS transmitted on Fiber on loss of Copper link
AIS transmitted on Copper on loss of Fiber link
Can be used with fractional T1/E1 circuits
|
| Certifications & Standards |
ITU-T
ANSI
AT&T
ETSI
Compliance:
UL Listed
C-UL Listed (Canada)
CISPR/EN55022 Class A
FCC Class A
CE Mark
|
|
| Warranty | Lifetime Limited |
|
