Tripp Lite's SMART 1500RM2U intelligent, line-interactive sine wave rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 19 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts and overvoltages from 83 to 147V. 1500VA/1000 watt power handling capability and full time sine wave output supports networking, telecom and other sensitive electronic applications. Includes a total of 8 outlets arranged in 2 load banks that are individually controllable by a software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications ports support messaging of detailed UPS operational parameters and line power status. Includes PowerAlert UPS monitoring and unattended shutdown software with management support for an unlimited number of network UPS systems. Built-in
|
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
SMART1500RM2U |
| Manufacturer Website Address |
www.tripplite.com |
| Brand Name |
Tripp Lite |
| Product Line |
SmartPro |
| Product Name |
SmartPro 1500RM2U UPS |
| Product Type |
Line-interactive UPS |
| Technical Information | Plug/Connector Type | NEMA 5-15P |
| Receptacles | 8 x NEMA 5-15R |
|
| Power Description | Load Capacity | 1500VA/1000W |
| Input Voltage | 110V AC |
| Input Voltage Range | 120V AC Single-phase |
| Output Voltage | 120V AC Single-phase |
| Frequency | 60Hz |
| Waveform Type | Sine Wave |
| Filtering | EMI / RFI |
|
| Management | Network Management | SNMP Manageable Optional |
| Overload Protection | 15A input breaker |
| Alarm | On Battery
Overload
Low Battery |
| Emergency Power OFF | Yes |
|
| Controls/Indicators | Status Indicators | 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. |
|
| Interfaces/Ports | Interfaces/Ports | 1 x DB-9
1 x USB |
| Modular Slots | 1 x Communications Slot |
|
| Battery Information | Batteries | Sealed Lead Acid User-replaceable Hot-swappable |
| Backup/Run Time | 10 Minute 1500VA Full Load
25 Minute 750VA Half Load |
| Battery Life | 3 Year to 6 Year |
| Battery Recharge Time | 4 Hour |
|
| Environmental Conditions | Temperature | 32 °F (0.0 °C) to 104 °F (40.0 °C) Operating |
| Humidity | 0 to 95% Non-condensing Relative Humidity |
|
| Physical Characteristics | Form Factor | 2U Rack-mountable |
| Power Cord/Cable | 10 ft |
| Dimensions | 3.5" Height x 17.5" Width x 13.5" Depth |
| Shipping Dimensions | 9" Height x 24" Width x 20.25" Depth |
| Weight | 46 lb |
| Shipping Weight | 53 lb |
|
| Miscellaneous | Package Contents | SmartPro 1500RM2U UPSSMART 1500RM2U UPS SystemMounting hardware for 4 post rackmount installationCabling for USB & DB9 monitoring and EPO switchingPowerAlert unattended shutdown and UPS/Power monitoring softwareWarranty information |
| Additional Information | SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
1500VA / 1000 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices
Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional 2-9USTAND accessory
Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1000 watts)
Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Two year warranty with $250,000 connected equipment insurance (USA & Canada only) |
| System Requirements | TYPICAL APPLICATIONS:
Ideal for rackmount or upright tower protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. |
| Certifications & Standards | UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |
|
| Warranty | 2 Year |
|
