Tripp Lite's SMART 3000NET intelligent, line interactive large tower UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 23 minutes half load runtime and 7 minutes fully loaded. Runtime is expandable with optional BP24V28-2U (limit 1) and BP24V70-3U (multi-pack compatible) external battery packs. 3000VA/2400 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications. Includes 8 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS monitoring via 2 built in contact closure ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in audible alarm and front panel LEDs indicate line power, battery power, battery charge level, load level and voltage regulation status. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive large gray tower housing. Two year warranty with $250,000 connected equipment insurance.
|
| Manufacturer |
Tripp Lite |
| Manufacturer Part Number |
SMART3000NET |
| Manufacturer Website Address |
www.tripplite.com |
| Brand Name |
Tripp Lite |
| Product Line |
SmartPro |
| Product Name |
SmartPro 3000NET UPS |
| Product Type |
Line-interactive UPS |
| Technical Information | Plug/Connector Type | NEMA L5-30P |
| Receptacles | 4 x NEMA 5-15R
4 x NEMA 5-20R |
|
| Power Description | Load Capacity | 3000VA/2400W |
| Input Voltage | 110V AC |
| Input Voltage Range | 120V AC Single-phase |
| Output Voltage | 120V AC Single-phase |
| Frequency | 60Hz |
| Filtering | EMI / RFI |
|
| Management | Network Management | SNMP Manageable Optional |
| Overload Protection | 35A input breaker and two 15A output load breakers |
| Alarm | On Battery |
|
| Controls/Indicators | Status Indicators | Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information |
|
| Interfaces/Ports | 3 x DB-9 |
|
| Battery Information | Batteries | Sealed Lead Acid |
| Backup/Run Time | 7 Minute 3000VA Full Load
23 Minute 1500VA Half Load |
| Battery Life | 3 Year to 6 Year |
| Battery Recharge Time | 4 Hour |
|
| Environmental Conditions | Temperature | 32 °F (0.0 °C) to 104 °F (40.0 °C) Operating |
| Humidity | 0 to 95% Non-condensing Relative Humidity |
|
| Physical Characteristics | Form Factor | Tower |
| Power Cord/Cable | 8 ft |
| Dimensions | 17" Height x 9" Width x 13" Depth |
| Shipping Dimensions | 16.5" Height x 23" Width x 13" Depth |
| Weight | 80 lb |
| Shipping Weight | 87 lb |
|
| Miscellaneous | Package Contents | SmartPro 3000NET UPSSMART 3000NET UPS SystemPowerAlert Software and three 6 foot network cablesWarranty informationInstruction manual |
| Additional Information | SMART3000NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
3000VA / 2400 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices
Large internal batteries offer runtimes of 23 minutes at half load (1500VA / 1200 watts) and 7 minutes at full load (3000VA / 2400 watts)
Runtime is further expandable with optional external BP24V33 battery packs
Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V
Includes 8 fully protected outlets (4 NEMA 5-15R & 4 NEMA 5-15/20R) with 2 single outlet load banks that can be individually powered off and back on again via software interface
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user defined script commands
Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the monitoring of any number of additional servers over IP with included PowerAlert monitoring software
In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity
Supports activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
Diagnostic LEDs (indicate 17 performance conditions)
UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Residential) Listed
$250,000 Ultimate Lifetime Insurance (USA & Canada Only) |
| System Requirements | TYPICAL APPLICATIONS:
Ideal for the protection of communication equipment including: routers, hubs, switches, IP-PBX, Traditional PBX and Key/Hybrid Telephone Systems. Also ideal for the protection of data processing equipment such as fileservers, workstations and other sensitive devices requiring clean, continuously regulated output power. Extended runtimes are available using additional external battery packs (BP24V33). |
| Certifications & Standards | UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |
|
| Warranty | 2 Year |
|
