The shipping process is fully robotic and orders are normally pulled and shipped quickly in 7 different warehouses across the US and then dropped in sealed USPS, UPS and FedEx containers for pick-up on the next business day. High volume or backordered items may have additional shipping delays. Once pulled, orders cannot be stopped, however you can return orders for refund unopened if you have changed your mind. Tracking normally is sent / updated within 48 hours of pick-up. Delivery is normally 3-10 business days after leaving the warehouse, however carrier delays may occur. Shipping may take longer in rural areas, due to carrier delay, weather or acts of God. Weekends and Holidays do not count as business days and have no pickup, movement or delivery.
Covid 19 Update — We have seen slowdowns and backlogs in package pickup, sorting, scanning and delivery by UPS, Fedex and USPS caused by worker shortages and facilities disruption due to the Covid 19 Pandemic. Some UPS and USPS hubs are no longer scanning all packages, as a result some tracking will show nothing until delivery.
* ground shipping normally takes 3-10 business days, depending on destination
Click here to view our Return Policy
Click here to view our full Terms of Sale
Features | Extends a Network Connection up to 10 km over SC Singlemode Fiber Optic Cable
This network media converter converts a copper Gigabit Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 10 kilometers (6.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-H01-SCSM with singlemode fiber cable to reach hubs, switches and other network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N785-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N785-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Manufacturer | Tripp Lite by Eaton |
Manufacturer Part Number | N785-H01-SCSM |
Manufacturer Website Address | https://tripplite.eaton.com/ |
Brand Name | Tripp Lite by Eaton |
Product Model | N785-H01-SCSM |
Product Name | N785-H01-SCSM Transceiver/Media Converter |
Product Type | Transceiver/Media Converter |
Interfaces/Ports: | |
Total Number of Ports | 2 |
Network (RJ-45) | Yes |
Number of Network (RJ-45) Ports | 1 |
Number of SC Ports | 1 |
SC Port Type | Duplex |
Media & Performance: | |
Media Type Supported | Twisted Pair Optical Fiber |
Fiber Mode Supported | Single-mode |
Fiber Optic Wavelength | 1310 nm |
Maximum Distance Supported | 6.21 Mile |
Network & Communication: | |
Ethernet Technology | Gigabit Ethernet |
Network Technology | 10/100/1000Base-T 1000Base-X |
Power Description: | |
Power Source | AC Adapter |
Power Consumption | 1.80 W |
Plug/Connector Type | NEMA 1-15P |
Physical Characteristics: | |
Form Factor | Wall Mountable DIN Rail Mountable Desktop |
Height | 0.9" |
Width | 2.9" |
Depth | 4.3" |
Weight (Approximate) | 8.43 oz |
Miscellaneous: | |
Package Contents |
|
Environmentally Friendly | Yes |
Country of Origin | Taiwan |
TAA Compliant | Yes |
Warranty: | |
Limited Warranty | 2 Year |
Files: | |
Manufacturer-Brochure | |
The "Add to Cart to See Price" message indicates an additional discount is in effect, and this discount is calculated in the Shopping Cart.
You can see this price by adding this item to your shopping cart.
Please be assured that simply adding an item to your cart does not obligate you to buy it--you can always delete the item from your cart if you decide not to purchase it.